Bell & Gossett is a leading manufacturer of products for HVAC, plumbing, and wastewater applications. Product portfolio includes pumps, valves, heat exchangers, pump packages, and accessories for water and steam systems.

Bock Water Heaters, Inc. manufactures water heaters designed to operate on any fuel (solar, geothermal, natural gas, propane, oil and electricity) and offers a large portfolio of indirect water heaters and storage tanks. Check out the Optitherm modulating, high efficiency, tank-type water heater.

Cain Industries manufactures waste heat recovery systems for gas and diesel cogeneration systems, boiler exhaust stack economizer systems, and fume incineration systems.

Cemline Corporation manufactures tanks, pressure vessels, packaged water heaters, unfired clean steam generators, and replacement tube bundles for the plumbing, HVAC and industrial markets Cemline specializes in in cement-lined storage tanks, which provide longer life than typical glass-lined tanks.

Blackmore and Glunt is an authorized stocking distributor for Centrotherm Eco Systems, the world leader in non-metallic HDPE flue gas venting systems.  The ease of installation of these systems saves significant labor vs. traditional vent systems.

Delta Cooling Towers, Inc. manufactures cooling towers constructed of engineered plastic (polyethylene) for the most corrosion proof cooling tower for any application.

Domestic Pump offers the broadest selection of condensate transfer equipment for application in low- and high-pressure steam systems, including centrifugal pumps, boiler feed units and condensate return units.

Magnetic strainers prevent build-up of ferrous oxide and scale. This increases system component life and performance.

Electro Static Technology Inc. manufactures the AEGIS® shaft grounding rings which protect motor bearings from induced stray shaft voltages caused by VFDs. Save your motor from non-warranty failures related to bearing fluting by using AEGIS® shaft grounding rings.

Fabtek is a leading American manufacturer of stainless steel boiler systems. We design components and manufacture them in our state-of-the-art CNC machining center. Because we fabricate in stainless steel, our products are built to withstand the demanding environments often found near steam boiler systems.

Flow Conditioning Corporation manufactures fluid system accessories including Hydronic Indicators, Double Suction Diffusers, and Flange Adapters.

Flow Control Industries, Inc. manufactures high-performance pressure independent control valves (PICV). The DeltaP Valve is the only variable flow valve that improves system efficiency and guarantees coil delta T. It is built to not plug, built to last, and has all of the ports to prove it really is working!

Franklin Control Systems manufactures advanced building automation starters, VFDs and custom multiple pump starter and VFD panels.

Franklin Electric is headquartered in Fort Wayne Indiana.  They are a leading provider of water and energy systems while maintaining a commitment to corporate governance and environmental responsibility.  They offer the Cerus X-Drive VFD for variable torque applications, the SSP SmartStart Pump Starter with advanced motor protections, and the compact Inline 1100 SpecPAK pressure booster system for efficient water pressure boosting.

Fulton offers a full range of hot water and hydronic boiler products for the commercial heating market, including condensing, non-condensing, and dual-fuel options. Our high efficiency condensing boilers are designed to operate in the most aggressive and challenging of applications, while hybrid (condensing/non-condensing) systems provide a balance between up-front investment and long-term payback from energy savings.

Fulton has remained an industry leader in the design and manufacture of steam boilers since we began in 1949. With minimal footprints and flexible configurations, our range of vertical and horizontal steam boilers offer the most complete solutions for virtually every type of industrial application.

Galletti specializes in modular cold climate 2-pipe air-to-water heat pumps, designed for efficient operation even in colder climates. These innovative units feature four water connections, handling both chilled water production and hot water through total heat recovery modes.

Goulds Water Technology manufactures residential and commercial centrifugal and turbine pumps, controllers, variable frequency drives, pressure booster packages and accessories for HVAC, plumbing, industrial water and wastewater applications.

*Goulds is a registered trademark of Goulds Pumps, Inc. and is used under license.

Heatfab manufactures innovative and quality ventilation products including Saf-T Vent EZ Seal Al29-4C vent for Category I, II, III and IV gas fired appliances.

High-K Heat Exchangers is a company that provides gasketed shell and tube heat exchangers that are designed to transfer heat efficiently. These heat exchangers are unique in that they have the ability to isolate the system side, allowing for easy servicing and cleaning of the tubes without having to shut down. High-K Heat Exchangers also offers small footprint shell and tube heat exchangers that are designed for specific applications, rather than as a one-size-fits-all solution for industrial cooling.

Hoffman Specialty is a leader in manufacturing products for building steam and hydronic systems; including boiler feed units, regulators, vacuum breakers, vents, valves, steam traps, Y-Strainers, heat exchangers, pumps and more.

Hyfab specializes in providing complete, energy-efficient hydronic and plumbing packages. Their offerings include pre-engineered solutions for pumping, air separation, and hydronic heating systems. Additionally, they design Heat Transfer Packages that are UL 3rd-party approved. Furthermore, Hyfab offers modular mechanical rooms for easy installation and start-up, streamlining the process for creating enclosed mechanical solutions in the field.

J.J.M. Boilerworks Inc. manufactures condensate neutralizer products for handling low PH levels (high acidity) of condensate produced by today’s high efficiency gas boilers.

Stainless Steel Condensing Boiler Exhaust Stack.

Kadant manufactures pressure powered condensate and boiler feed packages and pumps and steam specialties.

McDonnell & Miller is a leader in engineering and manufacturing boiler controls, liquid level controls, low-water cutoffs, and flow switches for steam and hot water boilers in industrial, commercial and building trade applications.

The Metraflex Company manufactures flexible connectors, expansion joints, Metraloop® expansion loops, expansion compensators, pipe alignment guides, Metraseal link seal, butterfly valves, check valves and strainers.

Miljoco Corporation manufactures cost-effective temperature and pressure instruments of superb quality for a diverse market place.

Peterson Equipment Co., Inc. manufactures Pete’s Plug II pressure and temperature test plugs and gauge adapters

ProPak Solutions, based in the Midwest and founded by industry leaders, specializes in designing and assembling packaged systems. These systems are delivered on time and to specification, providing dependable, fully integrated solutions that reduce installation time and risk. With over 100 years of combined experience, ProPak caters to various markets, including commercial buildings, education, healthcare, institutional facilities, and industrial manufacturing.

A world leader in combustion technology since 1920, Riello designs and builds oil, gas, dual-fuel and low NOx burners that deliver unbeatable performance and reliability across the full range of residential and commercial heating applications, as well as in the most demanding industrial processes.

RIELLO now offers the Array, a modular watertube condensing boiler and the RTC, a dual-fuel condensing firetube boiler.

Sellers is known throughout the world for innovative design and manufacturing of the highest quality boilers, heaters, deaerators and related boiler room equipment, with unrivaled performance. Proudly made in the USA.
*Kansas excluding Wichita, Missouri, Central and Southern Illinois, Southern Ohio.

Vertiflo Pump Company designs and manufactures vertical wet pit pumps, end suction pumps, and self-priming pumps constructed of cast iron, stainless steel and special alloys.

Vibration Eliminator Co., Inc. designs and manufactures vibration control products for a wide variety of applications including spring and rubber mounts for equipment and engineered inertia bases.

Water Equipment Technologies (WET) manufactures reliable membrane-based water purification systems designed to produce high purity water, purify water for reuse, and create fresh water from the world’s oceans.

Wessels Company designs and manufactures pressure vessels, storage tanks and hydronic specialties for the HVAC, plumbing and industrial markets.

Custom Tanks, ASME Code, Lined & Unlined, Carbon & Stainless Steel